Chemical Reactionstoy Cars

A Christmas wish

For Christmas I would like to see the Canton of Zurich renounces nuclear power plants. Arguments for and against as many have already been explained on the listing I can do without here. Soon ending a decade that was marked by wars, terror and violence and I am looking for a more peaceful and free future and for that will be without the Canton of Zurich on nuclear power plants.

Iran proves that an exclusively peaceful use, such as the Nuclear Non-Proliferation Treaty its signatory states under international law agrees that it can not be effectively controlled. India, Pakistan, Israel and North Korea have not signed the contract just so they can promote the uncontrolled civilian and military uses of nuclear energy. The world was not following the collapse of the Soviet Union peacefully, but was divided into many groups and movements, some with only destructive views. Such groups will use nuclear weapons if they get the chance. A voluntary ban on such a huge Waffe erscheint zumindest unwahrscheinlich. Je mehr Staaten, und damit auch zunehmend Staaten mit grassierender Korruption und politischer Instabilität, die Atomkraft zivil nutzen, umso wahrscheinlicher wird ein militärischer Missbrauch und desto grösser das Risiko, dass Atomwaffen in die falschen Hände geraten. Solche kritische Staaten dürfen nie in Besitz der Atomtechnologie kommen, auch nicht für die zivile Nutzung. Völkerrechtlich und auch aus Gründen der Gerechtigkeit haben aber alle Staaten das Recht dazu.

Die einzige Möglichkeit, dies zu ändern ist freiwilliger, globaler Verzicht auf die Nutzung der Atomenergie und damit auch im Kanton Zürich. Statt das Geld in neue Atomkraftwerke to put, I would like to see the Canton of Zurich is launching a peace project. These include the promotion of alternative energy sources, improving the relevant technologies and their adaptation to developing countries, development and construction of transportation technologies on energy. Thus, the proliferation and potential misuse of nuclear energy and the restricted countries receive sun and wind in abundance a development perspective and the ability on the world market is a wanted product to offer. That would be an asset to humanity, and progress for peace.

Saying To Put On Picnik

San 10 measures in the nature and landscape protection

The recovery program is necessary and no area should be left out on potential savings from a review. The reductions in the nature and landscape protection but are evidence of some imagination of the Government Council, are not justified and dangerous. Little imagination, simply because there the expenditure will be reduced, where the lobby is weakest, not justified because the relevant agencies are among the few places in the cantonal administration, which have the trend of expenditure under control and dangerous, because our future adaptation and jeopardize development potential.

Although still the year of biodiversity, and have heard most of this term already, it is to give more sense in this context by the understandable species richness, even though the two concepts are not perfectly congruent. This wealth must be protected and preserved as it is the money-wealth majority uncontested. The claim that the species richness has increased in recent years to qualify, unfortunately. There were already billionaires in Switzerland before the balance of the 300 richest Swiss in their golden issue performed. An increase that is due to the fact that is executed a closer look, is not a real increase, but simply the result of an improved and much needed Inventory. All relevant indicators for the conservation of species diversity show negative or at best stable developments. Species richness is mainly due

• the increasing urban sprawl with the appropriate land use,
• the input of nitrogen and pollutants in soil and water,
• the fragmentation of habitats,
• intensifying Agriculture and
• the intensive use of the landscape with the disturbance and noise and light pollution

risk. In the meantime, it was recognized that a diverse and intact nature is also an important location factor. This is good, but we should also ask what else does the species richness for us. Farmers who share the latest research to know that species-rich systems deliver higher and more stable yields than monocultures. Biodiversity has an added value in francs. Elsewhere biodiversity provides important functions. Death of the beekeepers, the colonies need to fertilize wild bees left plants. A system of plants and animals filtered our drinking water. Technical filters cost more, much more. This list could go on for a long time. What we must not forget this: We need these services, not nature. And we brauchen sie auch in der Zukunft.

Durch den Klimawandel drohen 30 % bis 50 % der Arten zu verschwinden. Welche genau es sein werden, wird die Zukunft weisen. Wie ein Investor in unsicheren Zeiten in unsicheren Zeiten, der sein Portfolio diversifiziert, brauchen wir für unsere Zukunft einen grossen Artenreichtum und eine hohe genetische Vielfalt. Alles andere wäre fahrlässig. Sinnbildlich kann man es so sagen. Wollen wir auch in der Zukunft sicher einen 6-er würfeln, müssen wir schauen, dass wir möglichst viele Würfel haben.

Deshalb sollten wir genügend Gelder für den Natur- and provide landscape protection. The measures, which can carry the District so that are only a second best solution in place, but as long as it is free of misunderstood liberalism, destroy the environment at the expense of all, as long as unfortunately remain the main threat factors and as long as the second best solution is the only that we have.

Money Tree Invitation Poems

VI "for competitive Canton Zurich"

Among the enticing title "for competitive Canton Zurich" submitted to the cantonal committee a trade association is a national initiative to halve the property taxes. For the evaluation of this initiative, we should answer three questions.

Die erste Frage ist: Wie viel Geld braucht der Staat um seine Aufgaben zu erfüllen? Der Regierungsrat hat ein Sanierungsprogramm aufgegleist und teilweise werden die entsprechenden Massnahmen bereits im nächsten Jahr umgesetzt. Dies ist aber kein Zeichen, dass der Kanton zu wenig Geld hat, auch wenn es so verstanden werden könnte. Vielmehr tut sich die Verwaltung schwer damit, ihre Aufgaben zu hinterfragen und alten Ballast abzuwerfen. Ein Sanierungsprogramm ist somit eine notwendige Zäsur verkrustete Strukturen aufzubrechen und kein Zeichen, dass zu wenig Geld für die notwendigen Staatsaufgaben vorhanden ist. Es stehen aber noch zwei Abstimmungen zu Steuererleichterungen bevor. Einerseits the revision of the tax law, and secondly the transfer of the capital tax to the income tax. Tax losses and strengthen the competitiveness will come also. Further tax cuts are not in the current situation makes sense. This clearly argues against the popular initiative.

The second question we must answer is: Which taxes we want to fund the state? Maybe it makes sense to lower the property tax and finance the state through other sources. To assess this question, we must evaluate the tax effects on national economy. We need incentives for desirable behavior and we need to reduce the negative incentives. That is stated quite simply: labor and consumption should be taxed deep. Resource consumption and income without services should be heavily taxed. The property tax is one in my view, quite to the group of taxes that should be deep. Therefore, we ask ourselves now whether they are too high. A wealth tax actually a target return on capital taxation, as they should be paid from investment income, without jeopardizing the financial structure. Seen in today's property taxes too high. The asset growth is not threatened. Compared with countries with no property taxes we have in Switzerland dafür auch keine Kapitalgewinnsteuer und die Erbschaftssteuer ist in vielen Kantonen zumindest für die direkten Nachkommen und Ehepartner abgeschafft. Eine Senkung oder Aufhebung der Vermögenssteuer als Gegengeschäft zur Einführung einer Erbschaftssteuer oder zur Kapitalgewinnsteuer wäre als Idee durchaus prüfenswert. Eine Senkung, wie sie die Volksinitiative fordert, ist aber nicht angezeigt. Dies auch nicht, weil längst nicht alle Vermögen durch eine Leistung der besteuerten Person zustande kommen. Man denke dabei nur beispielsweise an die grossen Umzonungen zu Bauland.

Die dritte Frage bezieht sich auf den Steuerwettbewerb. Mit der Revision des Steuergesetzes is also the property tax cut. For tax competition, this reduction is sufficient. Even here is to forget that the low-taxed municipality in the canton of our position in the tax competition is decisive and not the comparison between the District of main settlements.

What remains is the argument of double taxation. This argument is popular, but of course nonsense. It is a very simple way to prevent the property tax, such as consumption. That would simply mean a rate of 7.6 percent for the VAT. The taxpayer can choose what he prefers.

It is actually in the nature of our cash cycle that we tax the money more times. The argument will therefore always be nonsense. An alternative I know. We could abolish all taxes, and the National Bank prints the money and gives it directly to the canton of Zurich. This solution is hardly useful. Who has other ideas, they should please let me know, I take them gladly.

The conclusion can now read in this issue only: The popular initiative is unacceptable and hopefully the initiators have a show and pull it down before the vote. The would also help save taxpayers' money.

Where Can I Buy Matula?

Übung 4: Bestandsaufnahme und Fassadenentzerrung

The exercise is 4, it is an inventory correction and the facade of the main facade of the 50 years of settlement. Furthermore, we should create a din-A1 plan to show the location of the buildings, of which we have Facades were processed. We should burn our results on a labeled CD in Jewel Case Booklet Included gelayoutes.

Review:

By the previous exercise, I had some experience with Photoshop, but since the equalization needed new tools, I had to familiarize myself first. After initial difficulties and uncertainties of the correction date helped me get the job done then but no major problems.
Using Photomerge I added 2-3 combined output images, so I had a larger front facade. This facilitated my work. Then I used the Crop tool to straighten the front. For the disturbing elements, such as Bäume oder Autos, von der Fassade zu entfernen nahm ich den Kopierstempel bzw kopierte bestimmte Stellen um die Fassade anzugleichen.

Bild 1:

Original

Original

Fassadendarstellung

Bild 2: 

original

facade view

3:

original

original

facade equalization

plan to inventory and Fassa Dene equalization

Quote Foe The Top Of Wedding Invitation

Übung 3: Fotocollage

In Exercise 3 is to create a photo collage of Neustadt an der Weinstrasse. This was made using Photoshop and the images that we had made during the city tour. At the beginning of the exercise, I went slowly, because I had never worked with Photoshop and accordingly had no idea how the program worked. The sidebar made with the various tools that further sub-points, and working with the various levels are a little hard at first. But after a short time, however, most problems were eliminated, so I could create my postcard with no major problems!

Now to create:

The first thing I thought about what motive I could take as wallpaper. I decided to take a picture from the marketplace, I think it is a beautiful view of the half-timbered houses and give them a nice background. Eg houses so I could sit behind the half-timbered houses, I copied the image and marked with the tool "magic wand" the sky of the picture and cut it out. Now I added this in my collage, so I had to put up the possibility of building behind the timber line.

wallpaper: Marketplace

The next step, I retouched the woman and the benches on the left image, use the tool " Clone Stamp "and resembled the floor or the shop window. Then I decided the collegiate church and another half-timbered house behind the houses to share. Therefore I took the "magnetic lasso" tool and cut out the two buildings and thus she added. The church I reflected horizontally, because they better fit into the picture.

retouched objects and pasted building

To the upper right corner to fill a bit I added a sun and painted in the interior, with the brush tool, a face. Furthermore, I decided to illustrate more clearly the well. Therefore I cut with the "Lasso" tool from the well on a different photo and put it moved slightly in the collage. Also, I was still the Elwedritschebrunnen in the image, I brought, like all used items, first in the right size. Just like two palms and two statues.

Inserted objects

As a last step, I used to insert the tool horizontal text "to the word" Neustadt an der Weinstrasse in the collage. Finally, I searched the Internet or a representation of grapes so the text to "underscore" and the arms of Neustadt, that I hung on the wall of a building. Ready was the photo collage.

finished collage

Proxy Server For Byond Games

Übung 2: Stadtanalyse Neustadt/Weinstraße (Plan 2/4)

Exercise 2, in which we should modify the plans 2 and 4, designed, at first a bit difficult and complicated. The exact working order that is necessary for the task, we got a few days later, which made things a bit confusing at the beginning. After we got the work orders, the majority, however, was clear. My group partner Carsten and I shared the work, so everyone made a plan and we discussed it then and then we gave each other support. In addition, waren die Korrekturtermine äußerst hilfreich und so konnten die nochmal aufkommende Fragen beantwortet werden.

101115_Uebung2_A04_Plan04
101115_Uebung2_A04_Plan02

Pokemon Light Platnuim

Erster Erfahrungsbericht: Erstellen meines Blogs

Anfangs dachte ich es wird kompliziert und ziemlich lange dauern einen Blog zu erstellen. Doch es war sehr leicht und ging recht schnell. Nach der Anmeldung auf der Seite wurde einem gut geholfen, in dem das Erstellen Schritt für Schritt erklärt wurde. Das erstellen des Blogs war somit kein Problem mehr!!

Kates Playground Red Dress Full Set

1. Semester

Über mich...

Ich heiße Sebastian B. und komme aus NW. Auf den Studiengang Raumplanung kam ich als erstes durch the Internet. Shortly after, a great article about this degree program in the Palatinate, which was very interesting and informative. So I've decided to study in Kaiserslautern planning!

Quickbooks Premier 2007 Product Number

GIS Exercise 4: Digitisation and face accounting

In the final GIS exercise, it was the task which uses a part of Kaiserslautern on an aerial photo digitized. This was "digitized polygon" with the help of function possible. After being digitized, the polygon was a query, which of the different uses:

* Other * Municipal

* Agriculture * Forest

* Sport and Recreation,

meets the polygon.


This could be done for the entire planning area, so that the whole air was digitized image.


was then using the function "resolve" the use of combined classes creating a new layer was created, which I have "use balance" mentioned.

Note: In case the function "dissolution" there has been a mistake, so that the entire traffic area not considered was



The last step was in keeping the surfaces of the individual uses for the layer "use record" calculate . But you have mentioned in the layer attribute table to open and use the field calculator. It had to make sure that is specified as the output field name "space", and an output field type "real". Then confirm as an operator "surface" and ok. Then we had to open the field calculator for a second time mit den selben Funktionen nur diesmal bei Felder "Fläche" benutzen. Dann wieder mit ok bestätigen und in der Attributtabelle waren die Flächengrößen der einzelnen Nutzungen zu finden. Jedoch fehlt auch hier der Verkehr, da dieser nicht mit aufgelöst wurde.


Die Übung kann in gezippter Form hier heruntergeladen werden.

Dry Cm Still Pregnant

GIS Exercise 3: Exercise for the Lecture Statistics - Statistical analysis of land prices

Bei dieser Übung ging es darum die Bodenpreise einer selbst gewählten Gemeinde in Rheinland-Pfalz zuerst in Google Earth darzustellen und anschließend eine statistische Auswertung durchzuführen.

1.) Darstellung mit Google Earth

Die Aufgabe war es die verschiedenen Bereich mit Polygonen in Google Earth abzugrenzen und ihrem Bodenpreis nach einzufärben und groß zu machen (1€/m² = 1m). Die Datengrundlage kam vom Bodenrichtwertinformationssystem (BORIS) Rheinland-Pfalz. Die dort erzeugten Karten habe ich als Screenshot gespeichert und als Bild-Overlay in Google Earth eingefügt.


Anhand dieser Vorlage war es mir möglich die einzelnen Gebiete mit Polygonen nachzufahren und sie anschließend einzufärben und die richtige Größe zu geben. Außerdem habe ich sie nur zu 50% deckend gemacht, sodass es möglich ist zu erkennen, wo die jeweiligen Bodenpreise sind.



had to that a legend be created so that you can assign the color values. I have also sorted in the kmz file, the land prices for clarity.



second Statistical analysis

In the statistical analysis, I first created the original list and out of a stem-leaf plot with the corresponding answers.

example, land prices
as church: Kaiserslautern

original list (n = 32): 160 / 140 / 140 / 165 / 175 / 180 / 175 / 190 / 210 / 260 / 170 / 210 / 255 / 170 / 190 / 490 / 660 / 360 / 370 / 1200 / 1000 / 600 / 180 / 1400 / 340 / 190 / 215 / 360 / 400 / 270 / 170 / 220

If you turn this diagram 90 degrees to get a bar chart showing the distribution shows better.


It can now make statistical analysis easy:

minimum: 140 maximum
: 1400
span: 1260
mode: 170, 190
Median: 212.5 Mean
: 350.46875
Außreiser: 1400 , 1200, 1000


Analysis:

Land prices in the study area with 1260 have a very large range. This is due to the difference of the maximum with the minimum, in this case 1400 € / m² - 140 € / m². The average value is formed in the dividing the sum of all values of n. He is in the area studied € 350.46875 / m². The median is the value at which 50% of values higher and 50% of the values are lower than him. Since n = 32 is there is the mode from the average of the two middle values (210 € / m² and 215 € / m²). The mode is the value that occurs most often. In this particular example, there are the floor Price 170 € / m² and 190 € / m², which occur 3 times each. Due to the described values, Mode and arithmetic means, it stands to reason that the three largest values 1000 € / m², 1200 € / m² and 1,400 € / m² Außreiser, as these are well above average and far away from the remaining values. A possible explanation for the significantly higher values of which has the high values are next to each other (see Google Earth) and thus form a district with a similar price range. The situation of high prices is centrally located in Kaiserslautern and are thus probably the most sought after and therefore the most expensive. Also striking is that the prices decrease from the center.


positional and scattering parameters:

location parameter will describe the values of the sample elements with respect to the measurement scale,
the totality of values. location parameters are considered:
- Arithmetic mean
- Quantile
-
mode - geometric mean
- Harmonic mean

scattering parameter analysis of the distribution of measured values. These include:
- variance
- Wingspan
- Mean absolute deviation
- average quartile range


Here is the kmz file and the textual version in pdf format for download in a zip file.

Writing Thank You To Pastor For Funeral

GIS Exercise 2: QGIS Project Natura 2000

Bei der zweiten Übung ging es darum ein Projekt mit dem Programm Quantum-GIS zu realisieren. Der erste Schritt war das projekt zu erstellen. Dabei ist darauf zu achten, dass die Karteneinheiten in Meter und die Pfade im Modus "Relativ" eingestellt sind. Die ist notwendig, dass das Projekt auch auf anderen PCs zu öffnen ist. Außerdem sollte der Name "Natura 2000" gewählt werden und als Koordinatensystem die Gauß-Krüger-Zone 2.

Anschließend mussten die Landkreisgrenzen, sowie die Vogelschutz- und FFH-Gebiete in Rheinland-Pfalz in das Projekt geladen werden.

Danach mussten eine Reihe von Layern be gleaden in the project:


- county boundaries of the districts of Birkenfeld and Bernkastel-Wittlich

- Complete Bird Areas that are affected by both counties
-> Replace Select by positions, "the tool used to be.

- Full FFH areas affected by the two counties
-> this must include the tool "Select by positions" are used.

- Bird protection areas or subdivisions within the two counties
-> It must be the tool Clip verwednet.

- FFH-areas or sub-regions within the two counties
-> where the tool must also "clip" are verwednet.

buffer zone of 200m around the bird sanctuaries in the district of Birkenfeld and
Bernkastel-Wittlich
-> It is necessary, the tool uses a "buffer".

- buffer zone of 200m around dei FFH-areas within the counties and Birkenfeld
Bernkastel-Wittlich
- are> Replace the tool uses a "buffer".



had

As a final step of extensions - a pdf file created by the county> Fast printing -> Quick Print Birkenfeld und Bernkastel-Wittlich als Ausschnitt hat. Dabei sollten die Landkreise in Rheinland-Pfalz auch angezeigt sein. Darüber hinaus sollte die Grafik noch die FFH-Gebite in den genannten Landkreisen mit den Pufferflächen, sowie die TK 100 von Rheinland-Pfalz beinhalten. bei der TK 100 ist darauf zu achten, dass dieser Layer in der Reihenfolge ganz oben liegt und unter dessen Eigenschaften "Kein-DatumWert" auf 0 gestellt wird. Dabei werden nur die schwarzen Flächen angezeigt, sodass keine anderen Layer verdeckt werden.


Die gezippte Datei kann hier heruntergeladen werden.

Throwing Someone A Shower After They Get Married

GIS Exercise 1: Find on "GIS and coordinate systems" and create a project with Quantum GIS

1. Aufgabenteil

Recherchieren zum Thema ‚GIS and coordinate systems'.


1) What the Gauss-Krüger-System (GK-system)?

The Gauss-Kruger system is a Cartesian coordinate system, which allows you to locate small areas of the globe with metric coordinates. It consists of rectangular coordinates, and is thus two-dimensional. The coordinates are divided into those matters and high value. The geographical coordinate grid is divided into 3 ° wide meridian strips, starting at the 0th Longitude.

2) Which units are to GK coordinates?

There are at the Gauss Kruger coordinate between easting and northing. The right value is the distance from the central meridian, the high value of the distance of a point on the equator. Values have the SI-unit meter.

3) What is an ellipsoid, which is used in the GK system?

An ellipsoid is formed by the rotation of an ellipse around one of their own axes. The surface of the ellipsoid is described mathematically. Thus, coordinates for the position are identified on its surface. When GK is
system uses the Bessel ellipsoid, as it is very suitable for the measurement because it is the geoid and the mean Curvature of the earth in Eurasia adapts very well.

4) What kind of projection is based on the Gauss-Krüger system?

Mercartor The projection is based on the Gauss-Krüger system. It is placed around the earth an imaginary cylinder that it touches the equator. From the center of projection in the center of the earth now all points of the globe are projected onto the cylinder. After rolling of the cylinder creates a flat map of the earth's surface, where it was only the equatorial abgebidlet track faithfully. The other parallels have on the image the same length as the equator, although shorter in reality. The card must have a North-South direction verzerrt werden, dass die Abbildung winkeltreu wird, so gelangt man zur Mercartor-Projektion.

5.)Worin besteht der Unterschied zwischen geographischen und projizierten, kartesischen Koordinaten?

Mit geographischen kartesischen Koordinaten kann die Lage eines Punktes auf der Erde beschrieben werden. Die Erde wird dabei in 360 Längengräde, von 180° östlicher Länge, bis 180° westlicher Länge und in 180 Breitengrade von 90° nördlicher Breite bis 90° südlicher Breite unterteilt. Ausgangspunkt für die Breitengrade ist der Äquator und für die Längengrade der Nullmeridian, der durch Greenwich verläuft. Um einen Punkt auf der Erde zu bestimmen wird je ein Breitengrad und ein Längengrad in Grad und Minuten angegeben. Dabei ist zu beachten, dass für dieses System die Erde vereinfacht als Kugel betrachtet wird.Bei projizierten, kartesischen Koordinaten kann man die Lage eines Punktes im Raum beschreiben. Es handelt sich um ein orthogonales Koordinatensystem, welches im zwei- und dreidimensionalen Raum verwendet werden kann. Im zweidimensionalen Raum hat das Koordinatensystem zwei unendlich lange Achsen (x,y) und im dreidimensionalen Raum drei (x,y,z). Die Achsen stehen orthogonal aufeinander und ihr gemeinsamer Ursprung ist der Nullpunkt. Durch die zwei bzw. drei Koordinaten, jeweils ein Achsenabschnitt, kann der Punkt exakt bestimmt werden.

6) Why are the so-called GK-meridian strip system used?

The Gauss-Krüger coordinate system is 3 ° wide meridian strips divided, as are thus held by many small projections that minimize distortion. When Mercartor projection leads to distortions. Through the use of many meridian strip, there is only a number, but minimal distortion and the map becomes more accurate.

7) How to recognize the code used the meridian strip to a coordinate?

Each meridian strip is given a code number, which is derived from the number of degrees of the central meridian ableitet z.b. 0°, 3°, 6°... .Kennziffer = {0°, 3°, 6°, ... , 351°, 354°, 357°} / 3.

Um negative Werte bei den Rechtswerten zu vermeiden, wird zu diesem Wert beim Gauß-Krüger-Merdianstreifensystem ein konstanter Wert von 500.000 m addiert.

2. Aufgabenteil Erzeugen Sie ein Quantum-GIS-Projekt mit folgenden Inhalten:

Auf der Grundlage der Topograpischen Karte 100 sind folgende Inhalte darzustellen:





1. Verwaltungsgrenzen für Landkreise, Verwaltungsgrenzen und Ortsgemeinden in verschiedenen border colors and thickness. Use <2> strengths are as a border, <1> and <0,5>. Set the counties with different fill colors dar.

second Protected areas with green borders in the same color and thickness 2 diagonal hatching.

third Labels of the local communities and protected areas for their names (attributes: NAME, GEBIETSNAM) in the appropriate color for the border and one for the size of the bottom requested image file (4) readable form. Note the logical order of the layers and use Layer the following names: topographically card 100, local municipalities, Association of municipalities, counties, conservation areas

4th Create a graphic file (file format, PNG ') for the spatial extent of the Weilerbach community with the file name, _ _uebung_1.png' in the directory \\ charges \\ Uebung_1 '.

As a first step, I have loaded the topographic map 100 as a raster layer in Quantum GIS.

Anschließend wurden die Verwaltungsgrenzen für Landkreise, Verbandsgemeinden und Ortsgemeinden in verschiedenen Umrandungsfarben und –stärken als Vektorlayer in das Porgramm geladen und sinnvoll übereinandergelegt. Außerdem wurden die Landkreise in verschiedenen Farben dargestellt und die Namen der Ortsgemeinden in der entsprechenden Farbe eingeblendet. Dabei musste darauf geachtet werden, dass bei den Eigenschaften der Topographischen Karte bei "Kein-Datum-Wert" 0 eingestellt wurde. Dabei werden die weißen Farben der Karte ausgeblendet, die über dem Layer Landkreise gelegen hätten und diesen somit had hidden. It is only possible to see some black parts of the map, so the corridor boundaries and place names that I want to have in your project.

then still had to the nature reserves with the corresponding names are displayed and laid over it. the end I had to find yet the Weilerbach community and save them as image files. Exercise in a zip file you can download here .

Islamic Quotes For Card

Exercise 6: Planning with AutoCAD - Correction

following plan was the starting point for the correction:

were some flaws with this plan exists. One of the criticisms was that the colors of the public and private open space were identical. However, this was apparently the quality of the print because the colors were perfect for my on-screen, as seen also at the top. Therefore have I changed the colors to a yellow-green cast, so it worked!. Moreover, the strains in the trees criticized as too obvious, so I have this reduced significantly:

The legend I had to clearly arranged under one of two plans, so that was not clear that those on both plans include. Therefore, I have the legend now arranged so that it lies between the two plans, and thus at first glance it becomes clear that the legend gillt for both plans:

The biggest mistake the charge was, however, the Layout. The plan was simply too many white faces. Therefore I have drawn the details on a scale of 1:250 significantly larger and thus filled a large part of the area. That's what I had ordered the general view on a scale of 1:500, including adding the legend and editor name, which almost no open space is more on the plan:

The AutoCAD file here and the plan as a pdf file be downloaded here.

What Does The Pinky Sign Mean

Exercise 6: Planning with AutoCAD

goal in Exercise 6, it was a hand drawing by using AutoCAD to digitize. The original plan was as follows Drawing:


This one had to adapt in AutoCAD first, then you could trace the various cases. After that it was in fact possible to specify the dimensions in the program, which should have the building.
First I painted all the buildings with land and open spaces, as this large area and are thus easy to draw. Then I have the details, such as trees, roofs, etc. added.


also was required or the lettering and dimensions, which was overcome by using Corel Draw very simple, so the following digitized model was the result.




Dieses Modell sollte jetzt noch auf einem Plan gelayoutet werden, wobei man eine Gesamtansicht im Maßstab 1:500 und eine Detailansicht im Maßstab von 1:250 darstellt. Dann noch eine Überschrift, Legende und Bearbeiterfeld.



Den Plan können Sie unter folgendem Link im pdf-Format herunterladen.

http://rapidshare.com/files/347900813/__bung_6_-_Planerstellung_mit_AutoCAD.pdf.html