In Exercise 6, we should be processed in Exercise 5 position in 3D with the Google program rebuild Sketch-Up.
We have added the floor plan map of the place in Julius Sektch-up, with the pin framed and scaled. The individual houses could be achieved through the tool "push / pull" model and the amount of input (to the lower right side) is quite simple. The next step was to insert the previously rectified images in Sketch-Up, to lie on the facades and using his position to so-called "pins". The roofs of the houses could be produced also quite easily by pulling the pin with a vertical line and the side surfaces of the roofs with other "lines" simply closes .... Complicated it was for the roof windows. They were through, not at a 90 ° angle to each other house walls and thus inclined roofs not always easy to model and often hovered in the middle of the room.
should then the space by floor coverings, trees and street furniture are embellished. Once these things will fit into the space program is extremely slow and you can change something bad, so you should make it until the very last. And the black, the 2nd to the February 2009, 11:45 clock has been set, the program was very slow. In the end we
position AGAINST a person on the pitch (equals about 1.80 meters) and took pictures of the square with the "Camera Tool". These images were placed on a poster, plot, and published on the blog.
All in all, this exercise is very time consuming and it was good that we druften another week more work on it.
