In Exercise 6 is one of the digitizing hand-drawn plan. This is to be made using the program AutoCAD. Leave was a plan in A2 format and a blog entry to describe the work with the program. This task had to do as an individual work.
First, the hand-drawn plan basis:
 |
| plan basis |
The first way to digitize the plan, I went to the houses and the road with the polyline. To paint the houses, I used the tool "Hatch". To give the roofs shading, I used the command "pattern" and picked out that color and texture. Then I marked the areas and dyed it. To display the trees I used the "Circle" and thus made a circle and what I still coloring. Diesma but "solid."
I repeated this process until all the houses were stained and traced. I dedicated the garden areas. To color these can, I went to the land area of the polyline and marked with the resulting surface. Now I repeated the process which I had previously made the roofs. So I dyed green space. The remaining houses on hand, which was shown in the hand-drawn based roughly I dyed gray one.
At least I colored the white areas still remaining in the appropriate color and created the dimension using the tool "Linear". I continued on to the starting point and the line moved up to the end point to the correct dimensions to obtain. However, this is in my mirror traffic, which I did not change or could not have got done. Have tried to align the axes again, which but did not work. As a final step I deleted the deposited plan basis.
moved to create the plan I have in the layout "Layout 1" and so I created my plan.
 |
| finished plan |
Here, we present the plan in PDF format:
Din-A2 Plan Exercise 6
0 comments:
Post a Comment